آنالایزر اندازه گیری غلظت و ترکیب PM10 ، PM2.5
اثرات آلودگیهای ناشی از ذرات معلق بر روی سلامت موجودات زنده باعث افزایش نگرانی ها در سالهای اخیر شده است. برای اقدامات پیشگیرانه موثر شناسای منابع تولید کننده ذرات معلق بسیار مهم میباشد. لذا اندازه گیری غلظت ذرات معلق در هوای محیط ضروری است. آنالایزر PX-375 بهترین گزینه برای این امر می باشد.
آنالایزر PX-375 دارای قابلیت نمونه برداری اتوماتیک، آنالیز مداوم و آنلاین کمی و کیفی ذرات معلق در هوا می باشد.
ویژگی های اساسی:
آنالیز مداوم PM2.5، PM10 یا TSP جرم و غلظت عناصر
طراحی کاملا فشرده در اندازه 16 اینچی مناسب برای آزمایشگاه های علمی، ایستگاههای ثابت و سیار مانیتورینگ کیفیت هوا (AQMS)
مناسب برای کاربردهای چندگانه: هوای درونی، هوای محیط، گازهای خروجی از دودکش، گازهای صنعتی، منابع آلوده کننده و ...
هزینه عملیاتی کم
بهره گیری از تکنولوژی جهانی X-ray fluorescence & Beta-ray attenuation
سازگار با منحنیهای کالیبراسون موجود (به عنوان مثال ICP-MS) برای کالیبراسیون PX-375
رزولوشن بالا در غلظتهای کم
Product name |
Continuous Particulate Monitor with X-ray Fluorescence |
Model |
PX-375 |
Measured object |
Particulate matter (PM10, PM2.5, TSP) |
Measurement content |
Particulate mass concentration and element concentration |
Common
Flow rate |
16.7L/min |
Sampling pump |
Linear drive system, externally installed |
Filter tape |
None-woven PTFE fabric filter |
Spot tape interval |
20/25/50/100mm selectable |
Filter tape replacement interval |
Approx. 1 month (In case of 100mm spot interval) |
Ambient operation temperature |
10˚C~30˚C |
Relative humidity |
0~80% RH noncondensing |
Altitude |
1000m or less |
Power supply |
AC100V~240V ±10%, 50/60Hz±1% |
Power consumption |
Approx. 400VA |
External dimension |
430mm(W)×550mm(D)×285mm(H) (without sampling pipe and measurement head) |
Weight |
Approx. 40kg (Without sampling pipe and measurement head) |
Data output |
CSV file (Average PM mass and elemental concentration) |
External connection |
EthernetTM, USB, RS-232C* (option) |
*Please consult about communication and instrument composition separately.
Mass analyzer unit
Measurement method |
Beta-ray attenuation |
PM10 |
US EPA Louvered PM10 Inlet |
PM2.5 |
BGI VSCCTM Cyclone |
TSP |
TSP Inlet |
Measurement range |
0~200/500/1000μg/m3 |
Repeatability |
±2% (against reference foil value) |
Span drift |
±3% (24hours) |
Lowest detection limit (2σ) |
±2μg/m3 (24hours) |
Sampling and measurement cycle |
0.5/1/2/3/4/6/8/12/24 hours |
Element analyzer unit
Measurement method |
Energy dispersive X-ray spectroscopy |
Detectable elements |
See Table 2 "Detectable Elements". Standard parameter is S, Ti, Cr, Mn, Ni, Cu, Zn, Pb, Al, Si, K, Ca, V, Fe, As. |
Primary X-ray filter |
Automatic switching for light metals/heavy metals |
Tube voltage |
Automatic switching for 15kV/50kV |
Detector |
SDD (Silicon Drift Detector) |
Sample image |
CMOS camera |
Lowest detection limit (2σ) |
Recommended EPA Method IO 3.3 See Table 1 "Lowest Detection Limit (Example)" |
Measurement range |
Up to measurement time |
Analysis time |
1000s (16.6 min) as standard 100 / 200 / 500 / 1000 / 2000 / 5000 / 10000s selectable |
Calibration material for X-ray intensity for standard parameter |
NIST SRM 2783, other materials (option) |
Safety functions for X-ray |
Internal lock system Key switch X-ray indication light |