آنالایزر سنجش کیفیت آب مدل TW-100

Imageآنالایزر TW-100 برای اندازه گیری کیفیت آب در تصفیه خانه ها و توزیع آب آشامیدنی طراحی شده است و رنگ، فشار و کلر و گل آلود بودن آب را تشخیص می دهد. این روش شیمیایی نیازمند کمترین تعمیر و نگهداری است. به همین منظور باعث کاهش در نگهداری محصول می شود.

این سیستم مجهز به سنسورهای هوشمند برای نظارت بر چهار پارامتر کیفیت آب از جمله رنگ، فشار و کلر و گل آلود بودن آب است و در صورت نیاز می توان سنسورها را به هفت پارامتر برای اندازه گیری افزایش داد. اندازه گیری نیازمند هیچ واکنشی نیست.

 

دارای یک نمایشگر لمسی با منوهای ساده برای کاربر و همچنین نمایش مقادیر اندازه گیری شده است.

سایز کوچک این آنالایزر منجر به استفاده گسترده آن در محیطهای مختلف می شود. 

  • Product name

    Water Distribution Monitor

    Model name

    TW-100

    Parameters

    Turbidity, color, free chlorine, water pressure (standard); pH, conductivity, water temperature (option)

    Methods

    See chart 1.

    Range

    See chart 1.

    Repeatability

    See chart 1.

    Display

    LCD display: 320 x 240 dot B&W graphic LCD with backlight (touch panel type)
    Standard version simultaneously displays four measurement categories (turbidity, color, free chlorine, and water pressure); Optional version simultaneously displays up to seven parameters (the four parameters plus pH, conductivity, and water temperature)

    Calibration method

    See chart 1.

    Automatic zero calibration

    (Turbidity, color, free chlorine)
    Calibration method: Measurement of filtered sample water
    Trigger: Internal control (timer) or external control.
    Interval: 1 to 9999 hours (can be set as desired within that range)
    Time: 20~99 minutes(can be set as desired within that range)

    Automatic cleaning

    (Turbidity, color)
    Cleaning method: Wiper cleaning
    Trigger: Internal control (timer) or external control.
    Interval: 5 to 9999 hours (can be set as desired within that range)
    (Free chlorine)
    Continuous cleaning with beads grinder

    Sample water conditions

    Temperature: 0 to 40°C (must not freeze)
    Pressure: 0.1 to 0.75 Mpa
    Flow rate: over 100 mL/min
    Flow rate for measurement: 50 to 100 mL/min
    * Be sure to flush the sample water before starting the system.
    * Be sure to install a bypass for the pipe to which the system is attached.
    * If there is any possibility that the sample water could freeze, please protect the system from cold temperature.

    Ambient temperature/humidity

    Temperature; 0 to 40°C; Humidity: 85% or less

    Analog output

    Type: Measurement value: Same number as parameters (4 standard, 7 as maximum)
    Specifications: DC 4 to 20 mA, insulated output (no insulation between parameters), maximum load resistance 600 Ω

    Output signal

    Type: Power off, batch alerts, maintenance
    Details: Power off: Output when power is off.
    Batch alerts: Cell temperature error, compensation temperature error, cell wiper error, internal communication error,water leak, battery error, upper and lower limit of measurement, light source error, zero calibration, span calibration,analyzer error
    Maintenance: Output when the system is in maintenance or calibration mode.
    Specifications: Non-voltage contact output, a contacts
    Contact ratings: AC 125 V, 0.3 A, DC 30 V, 1 A (depends on resistance load), each output COM is independent.

    Input signal

    Type: Cleaning start, zero calibration start, error check sequence start, error water sampling start
    Details: Cleaning start: Cleaning procedure initiated with closed contact input
    Zero calibration start: Zero calibration initiated with closed contact input
    Error discrimination start: Error discrimination initiated with closed contact input
    Error water sample sampling start: Error water sample sampling initiated with closed contact input
    Specifications: Non-voltage contact input (open collector contact can be used), insulated input
    Resistance when ON: Maximum 100 W; Open voltage: DC 26 V; Short-circuit current: Max. 13 mA

    Communications

     Interface: RS-232C compliant (*Remote monitoring system is option)

    Functions

    Estimation of sample water volume (counting type), internal water leak detection, error water sampling

    Data memory

    Measurement values for each parameters are stored in the unit’s data memory. Data can be transferred to a CF card.
    Memory interval: 1 minute or 1 hour
    Memory schedule: At the top of the hour
    Data memory longevity: 1 minute intervals: About 10 days; 1 hour intervals: About 1 year.
    * The latest data is written to up date a series of data.

    Wiring contact

    Wiring ground: For power source: φ4.5 to φ6; For input/output: φ12.5 to φ14

    Piping contact

    Sample water input: Rc 1/4; Drainage: Rc 1/4; Calibration solution input: Rc 1/8; Error sample sampling aperture: Rc 1/8

    Construction

    Designed for indoor installation. * Housed in a special case (frame) for exterior installation (option).

    Power

    AC 100 V to AC 230 V, ±10%, 50/60 Hz

    Power consumption

    AC 100 V to AC 120 V: 120 VA; AC 100 V to AC 230 V: 150 VA

    Mass

    Approx. 15 kg (Measurement unit only)

    External dimensions

     350 mm (W) x 160 mm (D) x 420 mm (H) (not including installation fixtures and projecting portions)

    Paint color/Material

    Munsell 5PB8/1; Unit case is made of SUS.

    Installation environment

     Install on a flat surface without vibration shocks. No dust, mist, or corrosive gases in the atmosphere.  Lower air pressure.  No direct sunlight. Ventilated air.  2,000 m or less above sea level.

ساعت های کاری

ساعت های کاری شرکت
"در روزهای غیر تعطیل رسمی"

شنبه تا چهارشنبه: 8 صبح تا 5 بعد از ظهر
پنجشنبه و جمعه: تعطیل

آدرس ما

  • تهران

    خیابان فاطمی غربی - پلاک 299 طبقه5
    کدپستی: 1411853795
    تلفن: 66903396 21 +98 
    فکس: 66944206 21 +98